Which Size Door?

Sectional Garage Doors

The size of the sectional garage door is expressed as the internal frame size.

Sectional doors usually fit on the rear of the brick pillars
If fitting between the brick pillars - please telephone us on 01691 670394
On most sectional doors the space needed on the back of the pillars is a minimum 90mm each side of the door width
Most sectional doors come complete with the 90mm steel frame (i.e. 2 uprights and a crossbar)

Please note that if Low Headroom Gear is required you can add it to your order by going to "Accessories".

Sizes / Technical

Hormann Sectional Doors

Spring System	Door Size	Minimum Ceiling	Minimum Ceiling	Side Room Required
		Height, if Manual	Height, if Automatic	Either Side of Door
				Width
Z	width up to 10ft	6'6" door 2100	2125	90 mm
Z	width up to 10ft	7' door 2225	2250	90 mm
N	width over 10ft	6'6" door 2210	2210	90 mm
N	width over 10ft	7' door 2335	2335	90 mm
L	width over 10ft	6'6" door 2100	2125	90 mm
L	width over 10ft	7' door 2225	2250	90 mm

Wessex Vienna Sectional Doors

	Sideroom Required	Headroom Required
Manual	70mm	130mm
Automatic	70mm	100mm

Henderson Sectional Doors

New table to be inserted here

Cardale Carteck Sectional Doors

The headroom required on all Cardale sectional doors (manual or automatic) is 115mm. The side room required on the rear of the brickwork opening is 82.5mm each side of the door width.

Insulated Roller Shutter Classic (77mm Slat) Doors

CLASSIC 77mm Slat
Headroom needed for box which houses roll is 300mm square. Doors over 3m high have 360mm square boxes. Doors under 2150mm high have 250mm boxes.
Side room for guides minimum 90mm. 70mm guides available for restricted space applications.
Usually this type of door is fitted on the rear of the brick pillars and behind the lintel. Part or all of the box can show below the lintel if headroom available is restricted. N.B. This will reduce drive-through height.
Any sizing questions, please telephone 01691 670394

The Insulated Roller Doors are made to measure (at no additional cost). They are generally fitted onto the rear of the brick pillars with the guides and box hidden behind the pillars and lintel. If headroom is limited then the lower portion of the box can sit below the lintel. It doubles up as a facia. The guides can also protrude into the opening if required.

Insulated Roller Shutter Compact (55mm Slat) Doors

COMPACT 55mm Slat
Headroom needed for box which houses roll is 250mm square. Doors under 2400mm high have 205mm square boxes.
Side room for guides minimum 68mm. 53mm guides available for restricted space applications.
Usually this type of door is fitted on the rear of the brick pillars and behind the lintel. Part or all of the box can show below the lintel if headroom available is restricted. N.B. This will reduce drive-through height.
Any sizing questions, please telephone 01691 670394

Insulated Garage Doors from Arridge Garage Doors